Home › Projects › Gutter Guard Installation in Redmond
High Point Gutter installed 94 feet of 6-inch Gutter Clean Pro guards on the existing black gutters of a modern Redmond home in October 2026. Before the guards went on, the crew resloped 49 feet of gutter on super hangers, lowered two gutters so new flashing could fit above them, and added 34 feet of black step-down flashing. The home was assessed in December 2025, and the work was done October 14, 2026.
| Location | Redmond, WA 98053 |
| Service | Gutter guard installation on existing gutters, with reslope, rehang, and flashing |
| Property | Modern home with black gutters, a standing-seam metal roof, and low-slope roof sections, under tall conifers |
| Condition found | Standing water, green algae, and conifer needles in the gutters; streaking on the fascia below the roof edge |
| Gutter guards | 94 linear feet of 6-inch Gutter Clean Pro |
| Reslope | 49 linear feet, re-hung on super hangers |
| Rehang | 19 feet: two gutters removed and reinstalled lower to make room for flashing |
| Flashing | 34 linear feet of step-down flashing, black |
| Downspouts | 3 existing downspouts reconnected |
| Also included | Gutter and downspout cleaning, roof blow-off |
| Project investment | $2,900 to $4,800 |
| Timeline | Assessed December 13, 2025; quote signed September 2026; installed October 14, 2026 |
What High Point found
The estimator visited on December 13, 2025, in the rain. The photos show the gutters along the metal and low-slope roofs holding standing water, with green algae on the inside walls and orange conifer needles piled at the outlets. At one downspout the needles had built up into a mat over the opening.
Below one roof edge, dark streaks ran down the fascia. The estimator marked two gutters on a photo to be lowered, resloped, and flashed.
Why the quote went beyond guards
The quote fixed the gutters before covering them. Forty-nine feet were resloped on super hangers so water runs to the downspouts. Two gutters, 19 feet in all, were taken down and reinstalled lower, to leave room for flashing above them. Then 34 feet of step-down flashing went in behind the existing flashing, to keep water from getting behind the gutter.
The crew note on the quote is specific about color: the step-down flashing had to be black, to match the all-black gutters on the house.
The guards are Gutter Clean Pro, in the 6-inch size to fit the existing gutters. The quote describes it as a dual-membrane cover and lists the manufacturer’s 45-year clog-free warranty against leaves and conifer needles.
How the project was completed
The homeowner signed the quote in September 2026, nine months after the assessment. On October 14 the crew cleaned the gutters and downspouts, blew off the roofs, resloped and re-hung the runs, lowered the two gutters, installed the black step-down flashing, reconnected three downspouts, and installed 94 feet of Gutter Clean Pro. Photos on October 16 show the finished guards below the flashing at the low-slope roof.
Gutter guard cost in Redmond, WA
This project fell in the $2,900 to $4,800 range. That covered 94 feet of 6-inch Gutter Clean Pro, 49 feet of reslope, the 19-foot rehang, 34 feet of step-down flashing, three downspout hook-ups, the cleaning, and the roof blow-off.
The guards were about half the price. The rest went to fixing the gutters underneath them. A home whose gutters already drain correctly would need only the cleaning and the guards. This range reflects the scope of this completed project and is not a current quote.
What homeowners considering gutter guards should know
Fix the gutters before the guards. On this house, 49 feet were resloped before any guard went on.
Flashing matters at low-slope roof edges. On this house two gutters were lowered so flashing could fit above them.
On a house with a strict color scheme, ask about flashing color. Here the crew note required black.
Related questions
How much do gutter guards cost in Redmond, WA?
This Redmond project fell in the $2,900 to $4,800 range, including 94 feet of 6-inch Gutter Clean Pro plus reslope, rehang, flashing, and cleaning. The guards alone were about half of that.
Can gutter guards go on existing gutters?
Yes. On this house the guards went on the existing 6-inch black gutters after 49 feet were resloped and two gutters were lowered for new flashing.
What is Gutter Clean Pro?
Gutter Clean Pro is a gutter guard the quote describes as a dual-membrane cover. The quote lists the manufacturer’s 45-year clog-free warranty against leaves and conifer needles.
What is step-down flashing?
Step-down flashing goes behind the existing flashing at the roof edge to keep water from getting behind the gutter. This job used 34 feet of it, in black.
What warranty came with this work?
The quote lists a 10-year workmanship warranty on the installation and a 3-year workmanship warranty on repairs to gutters High Point did not install.
About this project
This project documentation was prepared by High Point Gutter from the job records and photos from our crew, October 2026. Technical review by Ben Metsker, Manager, High Point Gutter.
High Point Gutter provides gutter guard installation in Redmond and across the Greater Seattle Area. See more projects in Redmond, or read about our gutter covers and gutter guards. Related projects: 441 feet of Gutter Clean Pro in Bellevue and Gutter Clean Pro on new gutters in Federal Way.