Home › Projects › Auburn Gutter Repair
High Point Gutter tuned up the gutters on a two-story home in Auburn, WA 98092 on December 23, 2025. We cleaned every gutter and downspout, reconnected a loose downspout elbow, resealed corners, added wire strainers to the downspout outlets and sealed the joint where a lower roof meets the siding. The leak at that joint traces to step flashing set into the siding, which is roofing work. See our other Auburn projects.
| Location | Auburn, WA 98092 |
| Service | Gutter tune-up and repair |
| Property | Two-story home with fiber cement siding and a lower roof against one wall |
| Found | Corners due for resealing, a disconnected downspout elbow, debris in gutters and downspouts, a leak at the roof-to-wall flashing |
| Work done | Full cleanout, elbow reconnected, corners resealed, roof-to-wall joint sealed, wire strainers in the downspout outlets |
| Tune-up scope | Cleaning up to 200 feet of gutter, sealing up to 4 leaking seams, refastening or realigning up to 50 feet |
| Project investment range | $800 to $1,300 |
| Dates | Assessed November 13, completed December 23, 2025 |
What we found
At the November 13 assessment, a downspout elbow near the top of one wall had come apart, several gutter corners needed resealing, and the gutters and downspouts were due for a cleanout. There was also a leak where a lower roof section meets the wall. That joint is protected by step flashing, and on this house the flashing is tucked behind the siding.

What we did
We recommended our gutter tune-up, which covers cleaning up to 200 feet of gutter, sealing up to four leaking seams, and refastening or realigning up to 50 feet. On December 23 our crew cleaned the gutters, cleared the downspouts, reconnected the elbow and laid fresh sealant across the inside seams of the corners. We also set wire strainers in the downspout outlets, which keep leaves and twigs in the gutter, where they are easy to clear, instead of in the downspout. More on our gutter repair service.



At the roof-to-wall joint, we sealed along the flashing where it meets the siding. The step flashing itself is embedded in the siding, so we could not adjust it. If that spot keeps leaking, the next step is a roofer.


Cost
Project investment range: $800 to $1,300. This range reflects the scope of this completed project and is not a current quote. Repair visits vary mostly with how many seams leak and how much gutter has to be refastened.
Related questions
Can a gutter crew fix a leak at step flashing?
Only from the outside. Step flashing is part of the roof and runs behind the siding, so if sealing the joint does not stop the leak, a roofer has to reset the flashing.
Are downspout strainers worth adding?
They help on downspouts that clog. The strainer holds debris in the gutter, which is easier to clean than a blocked downspout.
About this project
This project documentation was prepared by High Point Gutter from the job records and photos from our crew, November 2026. Technical review by Ben Metsker, Manager, High Point Gutter.
High Point Gutter provides gutter repair in Auburn and across the Greater Seattle Area. Related projects: a Kirkland repair with a 66-foot reslope and 12 corner reseals in Woodinville.
Dripping corners or a leak where the roof meets the wall?
We can tell you whether it is a gutter repair or a roofing problem. Request a free inspection or call High Point Gutter at (425) 449-6622.

