Home › Projects › Auburn Gutter Guard Installation
High Point Gutter installed 156 feet of 6-inch K-style gutter with DoublePro gutter covers on a two-story home in Auburn, WA 98001 on September 30, 2026. The job also included four custom odd-angle corners, two valley diverters, and two hardpipes so the upper downspouts no longer drain onto the lower roof. See our other Auburn projects.
| Location | Auburn, WA 98001 |
| Service | Gutter replacement with DoublePro gutter covers |
| Property | Two-story home with rooftop solar panels and tall evergreens behind it |
| New gutter | 156 linear feet of 6-inch K-style seamless aluminum, .032 gauge, Low Gloss White |
| Gutter covers | 156 linear feet of 6-inch DoublePro |
| Downspouts | 126 linear feet of 2×3-inch with 1 custom offset |
| Corners | 4 custom-fabricated odd-angle corners, 1 hand-mitered corner |
| Roof water control | 2 valley diverters, 2 hardpipes in Tuxedo Gray, 32 linear feet of counter flashing |
| Project investment range | $5,900 to $9,800 |
| Dates | Assessed August 12, installed September 30, 2026 |
What we found
At the August 12 assessment, the old gutters on the lower roof held a layer of dirt and debris, with tall evergreens behind the house. Two downspouts from the upper roof ended directly on the lower roof, which concentrates water on one patch of shingles and wears them faster. The roofline also has four corners that meet at angles other than 90 degrees.

What we recommended
For homes with firs, pines or heavy tree cover, we recommend DoublePro. It is a continuous hanger with a built-in cover, so one piece supports the gutter and covers it. We specified it on the full 156 feet of new 6-inch gutter.
The two roof valleys got valley diverters, metal backstops on top of the gutter that keep fast water coming down a valley from overshooting it. The two upper downspouts got hardpipes, which run along the roof surface and empty into the lower gutters instead of onto the shingles. The odd-angle corners had to be fabricated on site to fit.
The work
We removed and recycled the old system, formed the new gutter on site, built the four odd-angle corners and one mitered corner, and set 32 feet of counter flashing behind the drip edge. DoublePro went on every run. The downspouts are Low Gloss White with one custom offset to keep a downspout tight to the wall, and the hardpipes are Tuxedo Gray. More on our gutter covers and gutter guards.




Cost
Project investment range: $5,900 to $9,800. This range reflects the scope of this completed project and is not a current quote. The cover chosen and the number of custom corners and fittings a roofline needs account for most of the spread.
Related questions
Does a valley diverter replace a gutter cover?
No. They do different jobs. The cover keeps debris out of the gutter, and the diverter stops heavy water from a roof valley from shooting past the front of the gutter. This house got both.
Should upper downspouts drain onto a lower roof?
We recommend against it. A hardpipe carries that water along the roof into the lower gutter so it does not pour onto one spot of shingles.
About this project
This project documentation was prepared by High Point Gutter from the job records and photos from our crew, November 2026. Technical review by Ben Metsker, Manager, High Point Gutter.
High Point Gutter provides gutter guard installation in Auburn and across the Greater Seattle Area. Related projects: 469 feet of DoublePro in Kirkland and DoublePro on a sunroom gutter in Issaquah.
Gutters clogging under evergreens?
We can look at your roofline, valleys and downspouts and recommend the right cover. Request a free inspection or call High Point Gutter at (425) 449-6622.

