High Point Gutter
Call 425-449-6622 Get a Free Estimate
← All Posts

Auburn Gutter Replacement: 5-Inch K-Style With T-Rex Covers and New Fascia

November 16, 2026

New white 5-inch gutter and downspout at the corner of a painted brick house, Auburn, WA

Home › Projects › Auburn Gutter Replacement

High Point Gutter replaced the gutters on a single-story home in Auburn, WA 98002 in October 2026. The fascia behind the old gutters had rotted at the corners, so we replaced 80 feet of it with primed cedar before installing 229 feet of new 5-inch K-style gutter on the house and part of the shop, with T-Rex covers on 173 feet. See our other Auburn projects.

LocationAuburn, WA 98002
ServiceGutter replacement with fascia repair and gutter covers
PropertySingle-story home and shop, with dense plantings and trees close to the walls
New gutter229 linear feet of 5-inch K-style seamless aluminum, .032 gauge, Low Gloss White
Downspouts136 linear feet of 2×3-inch, Low Gloss White
Fascia80 linear feet replaced with 2×6 primed cedar, all 8 house corners repaired
Corners8 hand-mitered
Gable ends2 trimmed flush with the rafter tails
Gutter covers173 linear feet of 5-inch T-Rex
Counter flashing40 linear feet
Project investment range$7,900 to $13,100
DatesAssessed September 14, 2026; installed October 2026

What we found

At the September 14 assessment, the fascia was soft and breaking apart at the corners of the house, and one old gutter had plants growing in it. New gutter fastens through the fascia, so those boards had to be replaced first.

Old white gutter corner with dark, decayed fascia wood behind it and plants growing from the gutter, Auburn, WA
Corner of the house at the September assessment.
Close view of broken, rotted fascia board at the end of an old gutter run
This kind of damage is cut out before new gutter goes up.

At two gable ends, the trim extended past the rafter tails, which kept the gutter from running to the end of the roofline.

What we recommended

We recommended replacing the rotten fascia with 2×6 primed cedar, repairing all eight corners, and cutting the two gable ends flush with the rafter tails so the gutter could run the full length of the roof and catch all of its water. On top of that, a new 5-inch seamless system with hand-mitered corners, counter flashing and T-Rex covers. Painting was not part of the job, so the new cedar still needs paint to match the trim. More on our approach to gutter installation and replacement.

The work

The plantings around the house made access slow, and the fascia replacement, including cutting the soffit to fit the new boards, took our crew about five hours on its own. With the wood sound, we formed the gutter on site from .032-gauge aluminum, hung it on hidden hangers, mitered and sealed the eight corners, and set counter flashing behind the drip edge so roof water lands in the gutter instead of behind it. The old gutters and downspouts went to recycling.

New white gutter running along a painted brick wall toward a chimney, with a downspout at the corner
New gutter and downspout along the chimney side.
New white gutter turning a corner beside a brick chimney and satellite dish above thick shrubs
Corner at the chimney, above the shrubs.

At the homeowner’s request, we left a number of the old leaf guards on the house. On the garage, about 5 feet of fascia is missing, so the gutter along that stretch will not look as even as the rest.

New white 5-inch gutter and downspout at the corner of a painted brick house, Auburn, WA
Mitered corner and new downspout, October 2026.

Cost

Project investment range: $7,900 to $13,100. This range reflects the scope of this completed project and is not a current quote. On replacements like this, the amount of rotten fascia found behind the old gutters moves the price more than anything else.

Related questions

Why replace fascia before new gutters?

Gutter hangers are screwed into the fascia. If the board is soft, the fasteners have nothing solid to hold, so rotted sections are replaced before the new gutter goes up.

What does trimming a gable end do?

Cutting the gable trim back lets the gutter extend to the end of the roofline, so it catches the water from the whole slope.

About this project

This project documentation was prepared by High Point Gutter from the job records and photos from our crew, November 2026. Technical review by Ben Metsker, Manager, High Point Gutter.

High Point Gutter provides gutter replacement in Auburn and across the Greater Seattle Area, including T-Rex gutter guards. Related projects: a Puyallup replacement with eight sister tails and an Issaquah replacement with covers on every run.

Soft fascia or sagging gutter corners?

We can check the wood behind your gutters and tell you what needs replacing before new gutters go up. Request a free inspection or call High Point Gutter at (425) 449-6622.