High Point Gutter
Call 425-449-6622 Get a Free Estimate
← All Posts

Gutter Guard Installation in Renton, WA: Old Screens Replaced With DoublePro on 6-Inch Gutters, Fascia Re-Fastened

September 29, 2026

New 6-inch gutter with DoublePro cover along the roof edge of a Renton, WA home

Home › Projects › Gutter Guard Installation in Renton

High Point Gutter replaced the gutters and old screen covers on a Renton home with 133 feet of 6-inch K-style gutter and DoublePro covers. The house sits among heavy trees and landscaping. The crew also re-screwed 133 feet of loose fascia board, secured drip edge that was falling out, and shortened a fascia board at a gable end. They also installed a hardpipe so an upper downspout no longer empties onto the roof below. All of it was done in one day on May 28, 2026.

LocationRenton, WA
ServiceGutter guard installation with full gutter replacement
PropertyHome with heavy tree and garden coverage
Existing systemGutters with mesh screen covers, removed and recycled
Gutter covers133 linear feet of 6-inch DoublePro; 21 linear feet of 5-inch Gutter Clean Pro
New gutter133 linear feet of 6-inch K-style seamless aluminum, low gloss white
Fascia and roof edge133 feet of fascia re-fastened with screws, drip edge secured around the house, fascia shortened at a gable end
Downspouts16 feet of new 2×3-inch, 4 existing reconnected, 1 custom 4-inch offset, 1 hardpipe
Other details15 feet of counter flashing, 2 closed cutbacks, 2 stainless steel roof anchors
Project investment$4,900 to $8,100
TimelineAssessed May 18, installed May 28, 2026

What the homeowner asked for

The request was for a full gutter replacement. The existing gutters already had mesh screen covers, and the assessment photos show needles and debris sitting on top of the screens. The yard around the house is full of trees, shrubs, and garden beds. The quote paired the new gutters with a built-in cover system.

Original gutter with a mesh screen cover and needles on top before replacement in Renton, WA
Before: an original gutter with its mesh screen cover and needles resting on top, at the May 18 assessment.

What High Point found behind the gutters

The assessment turned up problems with the structure the gutters hang on. One fascia board had a metal patch with nails backing out of it. The quote calls for re-fastening the fascia with screws “all around the home,” 133 feet in total, so the new gutter would have solid wood to attach to. The drip edge was also coming loose. The quote notes that it was “falling out,” and the crew secured it around the house. At one gable end, the estimator marked the fascia to be cut back so it would fit inside the gable.

Nails backing out of a patched fascia board behind the old gutter in Renton, WA
A patched section of fascia with nails backing out, photographed at the assessment.
Weathered fascia board at a gutter corner at the assessment in Renton, WA
Weathered fascia at one of the old gutter corners.

The assessment also flagged the downspouts. The quote notes that some upper-level downspouts ended directly on the roof below, which puts concentrated water on the shingles in one spot.

Why DoublePro on 6-inch gutters

For homes with heavy tree coverage, DoublePro is the cover High Point recommends. It is a continuous hanger with the cover built in, so one piece does the job of both, instead of a separate screen laid on top of the gutter like the old system. The homeowner went with 6-inch K-style gutter, which High Point offers as an upgrade over standard 5-inch for more water-handling capacity. The quote also included 21 feet of 5-inch Gutter Clean Pro, a separate cover product.

The fascia and drip edge repairs were part of the same recommendation. A gutter and cover system is only as solid as the board it screws into, so the quote fixed the attachment surface along with replacing the gutters.

How the installation was completed

The crew removed and recycled the old gutters and screens, re-screwed the fascia, secured the drip edge, and trimmed the gable fascia. The new system is 133 feet of 6-inch K-style in low gloss white with DoublePro covers. Per the quote, the gutters are fastened with 1.5-inch galvanized hex-head screws with neoprene washers and set at a 1/4-inch drop every 10 feet. They added 15 feet of counter flashing at the roof edge and closed cutbacks at two gutter ends.

On the downspouts, they reconnected four existing downspouts and added 16 feet of new 2×3-inch downspout with a custom 4-inch offset. For the upper downspout that ended on the roof, they installed a dark gray hardpipe. It carries the water along the roof surface and drops it into the lower gutter. Two permanent stainless steel roof anchors were installed for safe crew access on this job and on future service visits.

New 6-inch gutter with DoublePro cover along the roof edge of a Renton, WA home
After: the new 6-inch gutter with the DoublePro cover along the roof edge on May 28.
New white downspout running down a lower roof section beside the wall of a Renton, WA home
A new downspout section running down a lower roof beside the wall at completion.

Gutter guard installation cost in Renton, WA

This project fell in the $4,900 to $8,100 range. That covered removal of the old gutters and screens, 133 feet of new 6-inch gutter, 133 feet of DoublePro, 21 feet of Gutter Clean Pro, fascia re-fastening, drip edge securing, the gable trim, 16 feet of new downspout, four reconnections, the offset, the hardpipe, counter flashing, closed cutbacks, and two roof anchors.

The two largest items were the 6-inch gutter and the DoublePro covers. The fascia and drip edge work added to the total because the structure had to be fixed first. A house with sound fascia and no downspout reroute would come in lower for the same footage. This range reflects the scope of this completed project and is not a current quote.

What homeowners with similar properties should know

If you already have screens and they are holding debris on top, the problem may be the type of cover, not a lack of one. On this job, the fix was a cover built into the hanger rather than another screen.

New gutters need solid fascia. Loose boards, backed-out nails, or drip edge that is coming off should be fixed as part of the gutter job.

Walk around and see where your upper downspouts end. If one drains onto the roof below, a hardpipe can carry the water to the lower gutter.

Related questions

How much do gutter guards cost in Renton, WA?

This Renton project fell in the $4,900 to $8,100 range. That included 133 feet of new 6-inch gutter and 133 feet of DoublePro covers, plus fascia and drip edge repairs, downspout work, and roof anchors. Covers on existing gutters, or a house that needs no structural work, would price differently.

What is the difference between DoublePro and a gutter screen?

A screen is a separate piece laid over the gutter, which is what this home had before. DoublePro is a continuous hanger with the cover built in, so the hanger and the cover are a single part of the gutter system.

Why was the fascia repaired as part of the gutter guard job?

The gutter and cover fasten to the fascia board. On this home the fascia had loose sections and nails backing out, so the crew re-fastened 133 feet of it with screws to give the new system a solid attachment point.

What is a downspout hardpipe?

A hardpipe extends a downspout that ends on a lower roof, carrying the water along the roof surface and depositing it into the lower gutter. On this project High Point installed one in dark gray for an upper downspout that had been draining onto the roof.

How long did this installation take?

The assessment was May 18, 2026, and the homeowner signed on May 22. Removal, the fascia and drip edge repairs, the new gutters and covers, and all downspout work were completed in one day on May 28.

About this project

This project documentation was prepared by High Point Gutter from the job records and photos from our crew, September 2026. Technical review by Ben Metsker, Manager, High Point Gutter.

High Point Gutter provides gutter guard installation in Renton and across King County. See more projects in Renton, or read about our gutter covers and gutter guards. Have covers that hold debris instead of shedding it? We can assess the covers, the fascia, and the downspouts together.